Try these tried-and-true solutions if your Android phone or tablet won't turn on to get it working again.
The biggest dread of every smartphone user is trying to turn on their device and discovering nothing occurs. The power to your phone is out. A dead screen with no life on it is disastrous.
What may be the cause of your Android device not turning on? Let's examine some reasons and remedies.
{tocify} $title={Table of Contents}
How to Fix Your Android Phone or Tablet Won't Turn On?
1. Charging Issues
The most obvious explanation is typically the right one, as is commonly the case.
If there have been no previous indications of a problem with your phone, the issue may be as straightforward as a battery that is running low on power. That usually stems from problems with charging.
Examine Your Connections
Check the obvious things first. Do you know for sure that you charged your phone? Has the charger partially shifted out of the wall plug? Also, is the outlet switched on?
Rubble and Dust
Next, make sure neither the USB port on your charging cable nor the charging port on your phone is clogged with dust, grime, or other debris. Keep in mind that the connections are weak. Using a can of compressed air is the most effective method for cleaning crud from ports.
Troubleshoot Your Cable
It's common knowledge that USB charging cords can break down at any time. By connecting your connection to a different device and verifying if it functions, you may verify the cable's integrity. If you're interested in learning more about alternative options, we've examined some of the finest charging cords for Android.
Continue reading if your phone won't turn on even after charging.
2. Run the Power Cycle
Everybody has had a frozen phone. None of the buttons are functional, and the screen is unresponsive. However, did you know that a phone may also freeze while it is turned off?
A power cycle is one fix for an Android phone that won't turn on. It's as simple as pulling out the battery from older electronics with a detachable one, waiting a little while, and then replacing it.
Press and hold the power button on more recent phones without a detachable battery for several seconds. You might need to hold it down for anywhere between 10 and 30 seconds, depending on your manufacturer.
3. Check Your Battery
It's time to focus on your phone's battery if your phone died and won't switch on or charge, but you are certain that your charging device is functional and a power cycle didn't resolve your issues. Your phone could not be turned on for this reason.
After a few years of usage, the majority of phone and tablet batteries begin to significantly degrade in quality. They will eventually pass away totally. The battery may suffer irreparable harm from other sorts of damage as well. A battery can be destroyed by liquids, falls onto hard surfaces, and extremely high or low temperatures.
Verify that the battery is getting power
Wait a minute after plugging your phone or tablet into the charger to see whether the battery icon appears on the screen.
If so, your battery is in good condition, and you can go to the following stage. You could also see a tiny red (or another color) light flashing. If you do, it indicates that your battery is insufficient to turn on the device or enable the screen to show any content. Retry after giving it 30 minutes to charge.
You don't see a light or a battery symbol. That might imply that your battery needs to be replaced since it is dead.
You may get a replacement battery on Amazon for a reasonable price if your phone has a detachable battery. If your phone doesn't have a detachable battery, you'll need to either try to disassemble it and change the battery yourself or take it to a repair shop.
Be advised that if you attempt to replace the battery yourself, the device's warranty may be voided. Follow these instructions to examine the condition of your Android battery.
4. Check the Display
Your phone could not be turned on, but in actuality, it might be turned on without your knowledge. It may appear that there is no power if the screen is damaged.
Fortunately, it's simple to determine whether the issue is with your screen. Hold the Power button down for 30 seconds to make sure your phone is truly turning on, then give the boot process at least two minutes to finish.
Simply dial your own number now from a different phone. Your phone's screen is to blame if it rings. If your SIM card or eSIM has a PIN activated, you won't be able to contact yourself to see if your phone is enabled since the number will be disconnected.
In that situation, we advise approaching a stored Wi-Fi network. As long as Do Not Disturb is disabled, your phone should immediately connect to the network and you should be able to hear the sound of new alerts arriving. You must continue if your phone doesn't react any time soon.
You should keep in mind that you can occasionally change the screen on your own, but doing so will invalidate your warranty.
5. Use Your Computer to Troubleshoot
If your device still won't boot, you might be able to use your computer to force it to turn on. You can follow a relatively complicated set of instructions that Google offers. Below, we've distilled them down:
- Connect your phone to your computer using a USB cable.
- Let it charge for 15 minutes.
- Disconnect the cable from your device (not the computer).
- Reconnect the cable within 10 seconds of disconnecting it.
- Charge your device for a further 30 minutes.
- Press and hold the Power button for five seconds.
- Tap Restart on your screen.
- If you don't see Restart, hold the power button for a further 30 seconds.
6. Reset Your Android Device
Your device might start on, but it might not be able to go to the home screen after the boot process. A modified ROM or a corrupted upgrade might be at fault. You could try to reset your Android device in this situation.
Warning: Everything on your phone or tablet will be deleted if you reset it. Make sure to regularly save your essential Android data.{alertWarning}
Follow these instructions to reset your Android device in recovery mode:
- Press and hold the Power button and Volume Down for a few seconds until you see the Android logo on the screen. (This key combination varies with some manufacturers.)
- Use the Volume Up and Volume Down keys to navigate to Recovery Mode.
- Press the Power button.
- Use the Volume keys to select Wipe Data/Factory Reset and press the Power button.
- Finally, select the Yes Erase all Data option and press the Power button.
It will take a while for the reset to finish.
Your Android device may be damaged
If none of these suggestions have helped, it might be time to accept that you need a new phone. Keep in mind that certain phones are made to be used in harsh or unclean environments. One of these devices may be the best option if you frequently have blocked ports.